CBSE syllabus for class 12 physics, Physics syllabus for class 12
Unit I: Electrostatics (Periods 25)
Electric Charges; Conservation of charge, Coulomb’s law-force
between two point charges, forces
between multiple
charges; superposition principle and continuous charge distribution.
Electric field, electric field due to a point charge,
electric field lines, electric dipole, electric field
due to a dipole,
torque on a dipole
in uniform electric fleld.
Electric
flux, statement of Gauss’s theorem
and its applications to find field due to infinitely long straight
wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell
(field inside and outside).
Electric
potential, potential difference, electric potential due to a point charge,
a dipole and system of charges; equipotential surfaces, electrical potential energy of a system
of two point
charges and of electric dipole in an electrostatic field.
Conductors
and insulators, free charges and bound charges inside a conductor. Dielectrics and electric
polarisation, capacitors and capacitance, combination of capacitors in series and in parallel,
capacitance of a parallel
plate capacitor with and without dielectric medium between
the plates, energy stored in a capacitor. Van de Graaff generator.
Unit II: Current Electricity (Periods 22)
Electric
current, flow of electric charges in a metallic
conductor, drift velocity, mobility and their relation
with electric current; Ohm’s law, electrical resistance, V-I characteristics (linear and non-linear), electrical energy and power, electrical
resistivity and conductivity. Carbon resistors, colour code for carbon resistors; series and parallel
combinations of resistors; temperature dependence of resistance.
Internal
resistance of a cell, potential
difference and emf of a cell,combination of cells in series
and in parallel.
Kirchhoff’s laws and simple applications. Wheatstone bridge, metre bridge.
Potentiometer - principle
and its applications to measure potential difference and for comparing
emf of two cells; measurement of internal resistance of a cell.
Unit III: Magnetic Effects
of Current and Magnetism (Periods 25)
Concept of magnetic field, Oersted’s experiment.
Biot - Savart
law and its application to current carrying circular loop.
Ampere’s law and its applications to infinitely long straight wire. Straight
and toroidal solenoids,
Force on a moving
charge in uniform magnetic and electric fields. Cyclotron.
Force
on a current-carrying conductor in a uniform
magnetic field. Force between two parallel
current-carrying conductors-definition of ampere. Torque
experienced by a current
loop in uniform
magnetic field; moving coil galvanometer-its current sensitivity and conversion to ammeter and voltmeter.
Current
loop as a magnetic
dipole and its magnetic dipole moment. Magnetic dipole moment of a revolving electron. Magnetic field intensity due to a magnetic
dipole (bar magnet) along its axis and
perpendicular to its axis.
Torque on a magnetic dipole (bar magnet) in a uniform
magnetic field; bar magnet
as an equivalent solenoid, magnetic field lines; Earth’s magnetic
field and magnetic elements.
Para-, dia- and ferro - magnetic
substances, with examples. Electromagnets and factors affecting
their strengths. Permanent magnets.
Unit IV: Electromagnetic
Induction and Alternating Currents (Periods 20)
Electromagnetic induction; Faraday’s laws, induced
emf and current; Lenz’s Law, Eddy currents.
Self and mutual induction.
Alternating currents, peak and rms value of alternating current/voltage; reactance and impedance;
LC oscillations (qualitative treatment only), LCR series circuit, resonance; power in AC circuits,
wattless current.
AC generator and transformer.
Unit V:
Electromagnetic waves (Periods 4)
Need
for displacement current, Electromagnetic waves and their characteristics (qualitative ideas
only). Transverse
nature of electromagnetic waves.
Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, X-rays, gamma
rays) including elementary facts about their uses.
Unit VI: Optics (Periods 30)
Reflection
of light, spherical mirrors, mirror formula. Refraction of light, total internal reflection
and its applications, optical fibres, refraction at spherical surfaces, lenses, thin lens formula, lens-
maker’s formula. Magnification, power of a lens, combination of thin lenses in contact, combination
of a lens and a mirror. Refraction and dispersion of light through a prism.
Scattering of light - blue colour
of sky and reddish apprearance of the sun at sunrise and sunset.
Optical instruments : Human
eye, image formation and accommodation, correction of eye defects (myopia,
hypermetropia) using lenses.
Microscopes and astronomical telescopes (reflecting and refracting) and their magnifying powers.
Wave optics: Wave front and Huygen's
principle, reflection and refraction of plane wave at a plane surface using wave fronts. Proof of laws of reflection and refraction using Huygen's principle.
Interference, Young's
double slit experiment and expression for fringe width, coherent sources
and sustained interference of light. Diffraction due to a single slit, width of central
maximum. Resolving
power of microscopes and astronomical telescope. Polarisation, plane polarised light,
Brewster's law, uses of plane polarised
light and Polaroids.
Unit VII: Dual Nature of Matter and Radiation (Periods
8) Dual nature
of radiation. Photoelectric effect, Hertz
and Lenard’s observations; Einstein’s
photoelectric equation-particle nature of light.
Matter waves-wave nature of particles, de Broglie relation.
Davisson-Germer experiment
(experimental details should be omitted; only conclusion should be explained).
Unit VIII: Atoms
& Nuclei (Periods
18)
Alpha-particle scattering experiment; Rutherford’s model
of atom; Bohr model, energy levels,
hydrogen spectrum.
Composition and size of nucleus, atomic masses, isotopes, isobars; isotones. Radioactivity-
alpha, beta and gamma particles/rays
and their
properties; radioactive decay law.
Mass-energy relation, mass defect; binding energy per nucleon and its variation with mass number;
nuclear fission, nuclear fusion.
Unit IX: Electronic Devices (Periods 18)
Energy bands in solids (Qualitative ideas
only) conductor, insulator and
semiconductor; semiconductor diode – I-V characteristics in forward and reverse bias, diode as a rectifier;
I-V characteristics of LED, photodiode, solar cell, and Zener diode; Zener diode as a voltage
regulator. Junction transistor, transistor
action, characteristics of a transistor, transistor as an amplifier
(common emitter configuration) and oscillator. Logic gates (OR, AND, NOT, NAND and NOR). Transistor as a switch.
Unit X: Communication Systems (Periods
10)
Elements
of a communication system (block diagram only); bandwidth of signals (speech, TV and digital
data); bandwidth of transmission medium. Propagation of electromagnetic waves in the atmosphere, sky and space wave propagation. Need for modulation. Production and detection
of an amplitude-modulated wave.
Practicals (Total Periods
60)
The record,
to be submitted by the students, at the time of their annual examination, has to include
l Record of at least 15 Experiments [with a minimum
of 7 from section
A and 8 from section
B], to be performed by the students.
l Record
of at least 6 Activities
[with a minimum
of 3 each from section
A and section
B], to be demonstrated by the teachers.
l The Report of the project, to be carried out by the students.
Evaluation Scheme Total Periods
: 60
Two experiments one from each section
Practical record
[experiments &
activities] Project
Viva on experiments &
project
|
8+8 Marks
6 Marks
3 Marks
5 Marks
|
Total 30 Marks
|
SECTION A
Experiments
(Any 7 experiments out of the following to be performed by the students)
1. To determine
resistance per cm of a given
wire by plotting a graph
of potential difference
versus current.
2. To find resistance of a given
wire using metre bridge and hence determine the resistively
(specific resistance) of its material
3. To verify the laws of combination (series/parallel) of resistances using a metre
bridge.
4. To compare the emf of two given primary cells using potentiometer.
5. To determine the internal resistance of given primary cell using potentiometer.
6. To determine
resistance of a galvanometer by half-deflection method and to find its figure
of merit.
7. To convert
the given galvanometer (of known resistance and figure of merit) into an ammeter
and voltmeter of desired range and to verify the same.
8. To find the frequency of the a.c. mains with a sonometer.
Activities (For the purpose of demonstration only)
1. To measure the resistance and impedance of an inductor with or without iron core.
2. To measure
resistance, voltage (AC/DC), current (AC) and check continuity of a given circuit using multimeter.
3. To assemble
a household circuit
comprising three bulbs, three (on/off) switches, a fuse and a power source.
4. To assemble the components of a given
electrical circuit.
5. To study the variation in potential drop with length of a wire for a steady current.
6. To draw the diagram
of a given open circuit
comprising at least a battery, resistor/rheostat,
key, ammeter and voltmeter. Mark the components that are not connected in proper
order and correct the circuit and also the circuit diagram.
Experiments
SECTION B
(Any 8 experiments out of the following to be performed by the students)
1. To find the value of v for different values of u in case of a concave mirror and to find the focal length.
2. To find the focal length of a convex
mirror, using
a convex lens.
3. To find the focal length of a convex
lens by plotting graphs between u and v or between
1/u and 1/v.
4. To find the focal length of a concave
lens, using a convex
lens.
5. To determine
angle of minimum deviation for a given
prism by plotting a graph
between angle of incidence
and angle of deviation.
6. To determine refractive index of a glass slab using a travelling microscope.
7. To find refractive index of a liquid
by using (i) concave mirror, (ii) convex
lens and plane
mirror.
8. To draw the I-V characteristic curve of a p-n junction
in forward bias and reverse bias.
9. To draw the characteristic curve of a zener diode and to determine its reverse break down voltage.
10. To study
the characteristic of a common
- emitter npn or pnp transistor and to find out the
values of current
and voltage gains.
Activities (For the purpose of demonstration only)
1. To identify
a diode an LED, a transistor, an IC, a resistor and a capacitor
from a mixed collection of such items.
2. Use of multimeter
to (i) identify base of transistor, (ii) distinguish between npn and pnp type transistors, (iii) see the unidirectional flow of current in case of a diode
and an LED,
(iv) check whether a given electronic
component (e.g. diode, transistor or IC) is in working
order.
3. To study effect of intensity of light (by varying distance of the source) on an L.D.R.
4. To observe
refraction and lateral deviation of a beam of light incident
obliquely on a glass slab.
5. To observe polarization of light using two Polaroids.
6. To observe diffraction of light due to a thin slit.
7. To study the nature
and size of the image formed by a (i) convex
lens, (ii) concave mirror, on a screen
by using a candle
and a screen
(for different distances of the candle from the lens/mirror).
8. To obtain
a lens combination with the specified focal length by using two lenses from the
given set of lenses.
SUGGESTED INVESTIGATORY PROJECTS
CLASS XII
1 To study various factors on which the internal resistance/emf of a cell depends.
2. To study the variations, in current flowing, in a circuit
containing a LDR, because
of a variation. (a) in the power of the incandescent lamp, used to 'illuminate' the LDR. (keeping all the lamps
at a fixed distance).
(b) in the distance of a incandescent lamp (of fixed power) used to 'illuminate' the LDR.
3. To find the refractive indices of (a) water (b) oil (transparent) using a plane mirror, a equiconvex lens, (made from a glass of known refractive index) and an adjustable object needle.
4. To design an appropriate logic gate combination for a given truth table.
5. To investigate the relation between the ratio of
(i) output and input voltage and
(ii) number of turns in the secondary coil and primary coil of a self designed
transformer.
6. To investigate the dependence of the angle of deviation on the angle of incidence, using a hollow prism filled, one by one, with different transparent fluids.
7. To estimate
the charge induced on each one of the two identical styro foam (or pith) balls suspended
in a vertical
plane by making use of Coulomb's law.
8. To set up a common base transistor circuit and to study its input and output characteristic and to calculate
its current gain.
9. To study
the factor on which the self inductance of a coil depends
by observing the effect of this
coil, when put in series with a resistor/(bulb) in a circuit
fed up by an a.c. source of adjustable
frequency.
10. To construct a switch using
a transistor and to draw the graph
between the input
and output voltage
and mark the cut-off, saturation and active regions.
11. To study the earth's magnatic field using a tangent
galvanometer.
Recommended Textbooks.
1. Physics, Class XI, Part -I &
II, Published by NCERT.
2. Physics, Class XII, Part -I &
II, Published by NCERT.
No comments:
Post a Comment